Yugo 1.5mm Blank (US Stamping) NON FFL

8-10 Weeks NO FFL Yugo 1.5mm Blank (US Stamping) NON FFL
Brand: Childers Guns
Product Code: P1 Yugo blank
Availability: 8-10 Weeks NO FFL

Available Options

Special Instructions:

* Selector Markings:

* Stock Cut Options:

* Selector Notches:

Other Options:

Engraving Bottom Front (Max 15 Chars Per Line):

Engrave Emblem RIGHT:

Qty: Add to Cart

This Blank/Rails will fit all 1.5mm Yugo kits  (M70, M72, RPK, Underfolders)
(The back of the receiver is slant cut to fit Yugo parts kits)

  • Fully heat treated
  • Lower Rails Spot weled
  • Top Rails Trimmed to Spec
  • Mag Stabilizers Trimmed to Spec
  • Center Support Installed
  • Trigger Guard Rivet holes drilled

The new 2017 receiver blank from Childers Guns now includes our original factory style spot welds, making it the most Advance option for the home builder in the AK market to date. With the installation of the lower bolt guide rails, full heat treatment, and full bends this new receiver blank lets you enjoy gunsmithing without all the hassle, cost and doubt associated with Heat treatment, bending and welding.  In conjunction with our Layout Guides this makes the highest quality and lowest cost 80% Non-FFL AK receiver blank available.

This 80% receiver blank for sale is for a 47, not a 74.

U.S. Sec 922r compliant part.

For all underfolders and sidefolders the cuts will be minus the trunnion rivet holes unless you select the option – Rear Trunnion Rivet Holes.

Fixed stock trunnion holes are pilot holes only (.125"), they must be enlarged/fitted to your trunnions.
Engraving bottom front option is located on the bottom of the blank in front of the mag well.  Max 5 lines, 15 characters each line.  Contact us for custom engraving of other images / locations.

This Blank requires no FFL.

We also have Layout Guides, see related products below.


Where to purchase AK Kits - CG AK Resources listing vendors that sell AK / AKM kits

Who will Assemble AK Kits - CG AK Resources listing gunsmiths and manufactures specialing in AK / AKM

Engraving Gallery - For Emblem Engraving Examples

Dan on 11/12/2019
2 reviews
I was very pleasantly surprised at the quality and precision of this receiver. The rails were installed perfectly, the center support looks professionally done, the Trunnions from my de-milled kit fit like a glove and Childers even had the foresight to cut the sling groove in the LH side and drill the third rivet hole for the pistol grip nut (which also aligned with my rear trunnion!). I was also able to use Childers' plastic layout guide to drill the FCG, which worked perfectly as well.I am extremely happy with this purchase and will 100% buy receivers from Childers again.
Drexel on 02/17/2018
2 reviews
I used this blank for my yugo m72 Rpk build and went together great. The bends, magazine opening, engraving, and well pretty much everything about it is top notch. Thanks childers guns for a top notch product.

Write a review

Your Name:

Your Review:Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: