Childers Guns - Tantal Receiver
This receiver is designed for the Polish Tantal
These receivers are made using US stampings.
Each receiver is custom made, see availability for delivery times.
All holes are machined using CNC to insure accuracy.
The receiver is heat treated in our salt bath to 40 HRC.
Each receiver has the following completed:
Top rails trimmed
Mag well trimmed
Lower rails spot welded to receiver
Holes machined for:
Trigger guard rivets
Fire control group
Center support is installed
This receiver will allow you to use the unique left and right selector levers designed for the Tantal.
Selector markings Z and O on the operator side.
C, P, S and the ball detents are engraved on the ejector side.
Selector notch has been cut.
Other optional features avaliable - See above.
Fixed stock trunnion holes are pilot holes only (.125"), they must be enlarged/fitted to your trunnions.
Ejector tips will need fitted to your bolt (Easily done with a file).
The Tapco AK Retaining Plate can be used to complete this build.
Custom Serial Numbers:
Must be Roman letters (A,B,C) standard Numbers (1,2,3)
Must include at least one number (Not all letters)
Must be 4–14 characters including dashes and spaces
If your custom serial number is not available, we will contact you for an alternative.
This receiver is for a Tantal.
U.S. Sec 922r compliant part.
This receiver requires FFL transfer.
You must be 21 to purchase this item.
Where to purchase AK Kits - CG AK Resources listing vendors that sell AK / AKM kits
Who will Assemble AK Kits - CG AK Resources listing gunsmiths and manufactures specialing in AK / AKM
Engraving Gallery - For Emblem Engraving Examples
How To Order - How to purchase an FFL Item and ship to your FFL Dealer