Childers Guns - 9x39 Blank
This receiver is for custom 9x39 builds on 74 Stampings.
Magwell is cut for AK type 9x39 magazines (Csspecs, OTS12 / OTS14)*
*Mag stabilizers may need some fitting
Each blank is custom made, see availability for delivery times.
For all underfolders and sidefolders the cuts will be minus the trunnion rivet holes unless you select the option – Rear Trunnion Rivet Holes. This will allow the builder to better fit the rivets.
Childers Gun's blanks includes our original factory style spot welds, making it the most advanced option for the home builder in the AK market to date. With the installation of the lower bolt guide rails, full heat treatment, and full bends this 80% blank lets you enjoy gunsmithing without all the hassle, cost and doubt associated with Heat treatment, bending and welding.
For all underfolders and sidefolders the cuts will be minus the trunnion rivet holes unless you select the option – Rear Trunnion Rivet Holes.
Fixed stock trunnion holes are pilot holes only (.125"), they must be enlarged/fitted to your trunnions.
U.S. Sec 922r compliant part.
Engraving bottom front option is located on the bottom of the blank in front of the mag well. Max 5 lines, 15 characters each line. For OTS-12 and OTS-14 builds, contact us for proper number engraving to match the originals.
This Blank requires no FFL.
We also have Layout Guides, see related products below.
Trunnions / Stocks displayed for reference only - not included.
Where to purchase AK Kits - CG AK Resources listing vendors that sell AK / AKM kits
Who will Assemble AK Kits - CG AK Resources listing gunsmiths and manufactures specialing in AK / AKM
Trigger Humps - Blog entry detailing Trigger Humps / Bumps
Engraving Gallery - For Emblem Engraving Examples